PRESSURE SENSITIVE TAPES

Back to main side Sales Vacuum Bagging Materials

VAC-PAK® HS 8171 PS
High Temperature, high elongation nylon 6 carrier with a rubber based adhesive. Leaves no residue after 400° F cures.

VAC-PAK® E-3760 PS4
High Temperature, high tensile strength halohydrocarbon carrier with a fully cured silicone adhesive. Suitable for curing at temperature up to 400° F.

FLASHTAPE 1
High temperature multi-purpose blue 1 mil polyester tape with a fully cured silicone adhesive.Leaves no residue after 400° F autoclave cures.

FLASHTAPE 2
Same as FLASHTAPE 1, but with a 2 mil polyester tape

FLASHTAPE 5
Same as FLASHTAPE 1, but with a 5 mil polyester tape

FLASHTAPE 1R
High temperature multi-purpose 1 mil polyester tape with a fully cured rubber adhesive. Leaves no residue after 400° F autoclave cures.

FLASHTAPE 2R
Same as FLASHTAPE 1, but with a 2 mil polyester tape

FLASHTAPE 5R
Same as FLASHTAPE 1, but with a 5 mil polyester tape

TOOLCOAT
Adhesive backed TFE coated fiberglass, with a fully cured silicone or acrylic adhesive. Suitable for curing at temperatures up to 550° F.

TOOLCOAT S/T
Skived TFE pressure sensitive tape with a fully cured silicone or acrylic adhesive. Suitable for curing at temperatures up to 550° F.

Series 6325
Polyimide pressure sensitive tape with a fully cured silicone adhesive. Designed for curing at temperatures up to 800° F.

Raphold 1
High temperature "double-backed" tape suitable for general purpose use for curing at temperatures up to 400° F.

Raphold 10
High tack "double-backed" hold down tape suitable for Honeycomb Core and Foam hold down for machining and general purpose work.

For further information please contact us:

back